£319.99

Vu+ uno 4k IP +freesat

Vu+ uno 4k IP +freesat
New HD 4K Zapper Project

Now comes with Freesat HD channel list installed.

7 days EPG ( usb needed) for recording freesat channels

comes ready to use with or with out a dish but can also be use for FTA channels if you have a dish too.

This is IPTV only IF you are not sure what this is please contact us first before buying

This receiver will come with Vix image and channel list in that you can select.

These boxes are made to order and sometimes can take a few days shipping.

Pre Order Yours Today.

Includes

FREE Support included

Pre loaded VIX Image

Preloaded channels + IPTV

PLEASE NOTE THAT WE DO NOT LOAD THESE BOXES WITH ANY ADDONS THAT GIVE YOU FREE ACCESS TO FILMS ,SPORTS, PAY CHANNELS WITH OUT PAYING FOR THEM.

 

ALL BOXES LIKE ALWAYS ARE SOLD BLANK.

 

VU + Uno 4K Linux UHD Set-top box
Digital satellite receiver for UHD and HD TV and radio programs.
The heart of the VU + Uno 4K is the 2x 1,700 MHz ARM DualCore processor. 
Experience UltraHighDefinition (UHD) TV with the VU + Uno 4K Set-Top-Box.
 

What is a DVB-S2 FBC Twin Tuner?
A DVB-S2 FBC Twin Tuner has 8 demodulators.
For two conventional (e.g., twin LNB) satellite feeds, the tuner is comparable to two conventional and six additional tuners that operate in the loop mode. This allows you to view, stream, or record stations from 8 different transponders from two different satellites simultaneously.
In SCR mode (Unicable) with 8 frequencies, this corresponds to 8 conventional tuners.
 

What is a DVB-C FBC tuner?
A DVB-C FBC tuner has 8 demodulators. This corresponds to a receiver with 8 conventional DVB-C tuners.

You can view, stream, or record 8 stations at the same time.
 

Key Features:

  •     Very fast switching times
  •     WebKit Browser
  •     HD transcoding
  •     HbbTV
  •     HDMI 2.0 output
  •     Gigabit LAN
  •     1x tuner slot for e.g. DVB-S2 / DVB-C full-band capture (FBC) tuner
  •     USB 3.0
  •     ARM CPU (2x 1,700 MHz)
  •     EMMC flash memory
  •     HVEC / H.265 video decoding
  •     External 12 V power supply

 Technical Highlights:

  •     1,700 MHz ARM DualCore processor
  •     4096 MB Flash (eMMC)
  •     2048 MB DDR3 DRAM
  •     Gigabit LAN (10/100/1000 MBit / s)
  •     1x DVB common interface slot
  •     1x Smartcard Reader (Xcrypt)
  •     1x USB 3.0 (side)
  •     1x USB 3.0 (rear)
  •     S / PDIF Audio output optical (digital)
  •     1x HDMI 2.0 video / audio output (digital)
  •     Unlimited channel list for TV and radio
  •     EPG (Electronic Program Guide) support
  •     Supports bouquet lists (favorite lists)
  •     OSD in many languages
  •     Appearance of the user interface variedly customizable (skin support)
  •     Extensible with many free plugins (apps)
  •     Automatic / manual channel search
  •     DiSEqC 1.0 / 1.1 / 1.2, USALS
  •     SCR / CSS (EN50494 & EN50607)
  •     External 12 Volt power supply
  •     Power switch
  •     RS232 service interface
  •     Free apps for iOS and Android

Video decoding:

    
Video compression HVEC / H.265, MPEG-2 / H.264 and MPEG-1 compatible
    
Video Interface PAL G / 25 Hz, NTSC
    
Aspect ratio 4: 3/16: 9
    
Letterbox for 4: 3 TV sets
 

Output Digital:

    
Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz
    
S / PDIF output optical (AC3)
    
Audio coding:
    
Audio Compression MPEG-1 & MPEG-2 Layer I and II, MP3
    
Audio Mode Dual (main / sub), Stereo
    
Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
 

Power consumption:

    
<13W (in operation, with LNB)
    
<12W (in operation, without LNB)
    
<0.5W (deep standby mode)
 

External power supply:

    
Input: 110 - 240V AC / 50 - 60Hz / 1.0A
    
Output: 12V = / 3.0A

General information:

    
Ambient temperature + 15 ° C ... + 35 ° C
    
Relative humidity <80%
    
Dimensions (W x D x H): 230 mm x 175 mm x 50 mm
    
Weight: 0.75 kg

 
Conents:

    
1x VU + Uno 4K UHD Receiver
    
1x remote control
    
1x Quick start manual (German / English)
    
1x external IR receiver
    
1x HDMI cable
    
2x batteries (AAA)
    
1x power supply (110-240V / 12V)

 

Seven days EPG Guide and back file

Add The USB stick and we will configure the box and USB stick with files for seven days EGP + Backup file from your new box. 

Please Read

1. Don't Forget to add your forum username in the comments box.

2. If you know your usals (longitude and latitude ) please also add them in the comments box. These number must be from your satellite receiver and not from your mobile phone or GPS unit.

3. For fixed twinsat and triplesat systems please include the lnb ports to match the satellites if you know in the comments box.

Please Note we do Not load boxes with any means of hacking TV channels or offer help in the service including card sharing of any type.

Available Options:

Adult TV xxx:

FTA Channel list:

USB+Backup file+7Days EPG config:

Reviews
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
0 items
Share Product
Share via E-Mail
Share on Facebook Share on Twitter